Pricing Guide

    Zebra Scanner Screen Replacement Cost — 2026 Price Guide

    Zebra barcode scanner screen replacement starts from $185 at Red Barcode Planet, the same from price for the TC52, TC57, MC9300, MC93, MC92N0, and MC33. The final price is confirmed after your free diagnosis, and every repair includes parts, labor, calibration, a 200+ scan bench test, and a 90-day warranty. Most repairs ship back within 48 hours of receipt.

    Reviewed by Kris Klimas · Red Barcode Planet · Wheeling, IL · Published May 13, 2026

    Last updated: November 17, 2026

    Zebra barcode scanner screen replacement at Red Barcode Planet starts from $185, the same from price for every model — far less than buying new. Every price includes the OEM-compatible display, labor, calibration, a 200+ scan bench test, and a 90-day warranty. Most repairs are completed within 48 hours of receipt at our Wheeling, IL facility, with nationwide mail-in service for customers outside Chicagoland.

    Below is the full 2026 price list for the most common Zebra mobile computers and scanners, plus a breakdown of what's included, when repair beats replacement, and answers to the questions we get most often.

    Zebra Screen Replacement Pricing

    ModelScreen ReplacementIncludes
    Zebra TC52From $185Parts + labor + 90-day warranty
    Zebra TC57From $185Parts + labor + 90-day warranty
    Zebra MC9300From $185Parts + labor + 90-day warranty
    Zebra MC93From $185Parts + labor + 90-day warranty
    Zebra MC92N0From $185Parts + labor + 90-day warranty
    Zebra MC33From $185Parts + labor + 90-day warranty

    The from price applies to every model regardless of crack severity. The final price is confirmed after your free diagnosis. See our full repair pricing page for other Zebra models and issue types.

    Zebra TC52 Screen Replacement

    The Zebra TC52 uses a bonded LCD-and-digitizer assembly, which means a cracked glass and a dead touch layer are repaired the same way — full display module swap. Our TC52 screen replacement starts from $185 and includes the display, labor, calibration, full 200+ scan bench test, and a 90-day warranty.

    Zebra MC9300 and MC93 Screen Repair

    The MC9300 and MC93 ruggedized mobile computers share the same touchscreen architecture and are repaired at the same price point — from $185. Both are common in cold-storage, warehouse, and 3PL environments where drops and pallet impacts crack the display. See our MC9300 repair page and MC93 repair page for full repair scope.

    Zebra MC92N0 Screen Replacement

    The MC92N0 is one of the most widely deployed warehouse devices in North America. Screen replacement starts from $185. Because parts supply is healthy and the chassis is highly serviceable, an MC92N0 with a fresh display and battery typically gets another 3–5 years of fleet life — often less expensive than migrating the entire fleet to a newer platform. Details on our MC92N0 repair page.

    Is Screen Repair Worth It vs Buying New?

    Reseller listings we checked on November 10, 2026 price a new Zebra TC52 or TC52x at about $1,900 to $2,400 (prices vary by configuration and by day, and the TC52x is past end of sale, so stock and pricing change). Get a current quote for your model. Replacing the screen from $185 extends the device's useful life by another 2–4 years. You also keep your existing accessories, holsters, and cradles in service. Every unit comes back set to factory default, so back up first. For most warehouse and 3PL operators, repair is the right call until the chassis itself is worn out.

    What Is Included in the Repair Price

    • Free diagnosis on arrival — no charge if you decline the repair.
    • OEM-compatible display matched to original brightness and touch sensitivity.
    • Labor by trained technicians — no hourly surprises.
    • Touch calibration across the full screen surface.
    • 200+ scan bench test verifying scan engine, decode, and screen response.
    • 90-day warranty on the repair.
    Illustrative

    Example Repair Scenario (illustrative)

    Illustrative example - not a real customer or a verified case study.

    A 3PL in Indiana shipped 6 Zebra TC52 scanners with cracked screens after a busy peak season. We quoted from $185 each — from $1,110 in total. The shipment arrived Tuesday, all 6 displays were replaced, calibrated, and bench-tested by Wednesday afternoon, and shipped back Wednesday evening. The customer kept their existing holsters and chargers in service.

    Common Mistakes to Avoid

    Assuming a cracked screen means the device is dead — most Zebras are fully repairable for under $200.

    Buying a new scanner before getting a repair quote.

    Trying DIY screen replacement — the LCD and digitizer are bonded; mis-installation usually destroys the new part.

    Shipping without bubble wrap — a cracked-screen device can develop motherboard damage in transit if unprotected.

    What to Do Next

    Send us your Zebra model number and a one-line description of the screen issue. We'll respond within one business day with a written quote, shipping instructions, and a ticket number. Once approved, your scanner is repaired in 48 hours and shipped back with a 90-day warranty.

    Related Repair Services

    Need a Free Repair Quote?

    Tell us your model and the issue — we'll send a quote within one business day. 48-hour repair turnaround, 90-day warranty, No Fix No Fee.

    Nationwide mail-in repair · Free pickup in Chicagoland for 20+ units

    Get Your Barcode Scanners Fixed Fast

    Free quote in minutes. Fast turnaround. Nationwide service.

    No Fix, No Fee Guarantee

    If we can't repair your device cost-effectively, you pay absolutely nothing — not even shipping back. Risk-free repair, every time.

    *Beyond-economical-repair determination by our experienced technicians.

    🚀 Zebra • Honeywell • Motorola Repair — 48hr Turnaround

    → See Pricing→ How It Works→ Get Quote

    Fix My Scanners Now